PSA 16'' M4 Premium MOE Carbine

SKU: 30947

16" barrel length

5.56 Nato Chamber

1 in 7" twist

Chrome Moly Vanadium barrel

Chrome lined barrel

Forged upper and lower

Magpul MOE Grip, trigger guard, handguards and stock

Magpul rear BUS

Magazine

Lock

M4 Carbine starts with one of Premium chrome-lined Mil-spec steel barrels in the versatile M4 profile, mated to forged aluminum upper, and finished off with a MOE carbine hand guard, Pinned f-marked front sight post and A2 Flash hider.  The forged lower is built with 6 position Mil-spec size buffer tube and stock, Standard PSA lower parts kit with a MOE Grip and trigger guard.  The rifle is topped off with a Magpul rear back up sight.  It comes with one 30 Round Magpul P-mag (where allowed by law) so all you have to provide is the ammo to start having fun.

Barrel:  16" chrome-lined mil-spec chrome moly vanadium barrel, chambered in 5.56 NATO, with a 1/7 twist, M4 barrel extension, and a carbine gas system.   M4 style profile is phosphate coated to mil-specs, and is High Pressure tested, and Magnetic Particle inspected, to ensure quality and dependability.   Barrel is finished off with a standard carbine hand guard, pinned f-marked front sight post, rear Magpul Back Up Sight, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer, and are marked with the Palmetto State Armory logo on the left side, up front, just below the rail.

Bolt: Bolt is made of Mil-spec Carpenter 158 steel, Shot peened, and MPI. Gas key is secured with grade 8 fasteners and staked per mil-spec. Bolt carrier is parkerized outside, chrome lined inside.

Lower:  These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber.  Finish is Black Hardcoat Anodize per MIL-8625 Type 3 class 2.  Mil-spec sized buffer tube is forged of 7075 aluminum, is dry film lube coated on the inside, has 6 adjustment positions, is finished with a MOE stock and has a staked castle nut.  Standard carbine buffer is Black anodized and has the PSA logo on the face.  The standard PSA combat trigger has a smooth pull and clean break.